XL 0001910 HO Scale NMRA 8 pin plug-in Diesel Sound Decoder

(5 customer reviews)


Out of stock



If you need a Keep alive circuit installled to your decoder please order keep alive upgrade

  • Plug-in
  • 6 types of synchronized prime mover sounds
  • 22 different types of horns and 8 types of bells
  • 17 accessory light effects: ditch lights, mars light, gyra light, strobe light, prime strobe
  • 28 accessory functions (F1-F28)• Back EMF load control• Compatible with NMRA DCC standards• Complies with Part 15 of FCC Rules
  • Speaker included. Selectable speaker size (18 mm or 28mm)
  • Dimensions: 25.5mm x 17.4mm x 6.0mm

5 reviews for XL 0001910 HO Scale NMRA 8 pin plug-in Diesel Sound Decoder

  1. Corey Pedersen

    High quality decoder at a great price. Six different prime mover sounds. Very small size which makes installation much easier in older locomotives. Fast shipping and prompt customer service.

  2. Dennis M.McLaughlin

    I bought 4 of these decoders with the 28mm speakers i put one in a Ho Bachmann SD40-2 Dcc ready I bought new for $49 and for 29 dollars i had a sound Locomotive! I am not a Rivet counter and not fussy, so was quite impressed with the sound for the price! I also Put 1 in a Gp40-2 and a Gp-38-2 Athearn Genesis and they sound Great! am buying More!

  3. John Linton

    Thought I would try this decoder, since I had never heard of the company before and I’m new to dcc. The only issue I had was the 28mm speaker is much bigger than 28mm and would not fit in the location it needed to be. Luckil, they also sent a 13mm speaker with the decoder when I requested another 28mm. Although it works, it doesn’t have the same quality of sound. I’ll order some of the smaller speaker to try to improve the sound. Other than that, I will be ordering more.

  4. sam basile

    i ordered this by mistake for a dcc ready atlas switcher. it was barely 4mm too tall to install so i had to remove the plug pins and replace them with wire. easy. i’ve ordered 4 more since i’m very happy with the sound and the locomotive control. remember they will sound bad until they are installed and closed in. the sound i get is comparable to digitrax and soundtrax at 1/2 the price. only ONE drawback. the front and rear lights are NOT independent. you can only choose a lighting function for BOTH. many will complain of the lack of ‘features’. turns out most of them are nonsense and a waste of time. the BLI sound card requires a 66 page manual. who needs that. i’m very satisfied with this machine.

  5. JT White

    I’ve bought a couple of these sound decoders, steam and diesel and am very pleased with them. One I got was for a 1970’s Rivarossi Y6b and it finally sounds great. Will be buying more from them. Thanks XL Systems.

Add a review

Your email address will not be published. Required fields are marked *