Description
It comes with Jst 9 connector with 9 wires. If you need it also comes with 8 pin plug please add $2.00 ungrade item.
If you need a Keep alive circuit installled to your decoder please order keep alive upgrade
• Synchronized prime mover sounds: EMD710
• 1.5 amp capacity
• 22 different types of horns and 8 types of bells
• Adjustable individual sound volumes (16 levels)
• 17 accessory light effects: ditch lights, mars light, gyra light, strobe light, prime strobe
• 28 accessory functions (F1-F28)
• Back EMF load control
• Built in with 18mm speaker
• Compatible with NMRA DCC standards
• Complies with Part 15 of FCC Rules
• Dimensions: 38.0mm x 18.0mm x 8.0mm
William Martin Thrall (verified owner) –
Good morning,I have just a couple of these decoders as I normally use soundtraxx decoders.I have one in a overland brass sd60 loco and it runs good. Sounds are not good as soundtraxx but for a lower priced decoder they are fine. Their speakers seem to be really good, I have used many of the 16×35 in locos.Now the big bummer on these decoders. They do not support cv 6 for speeding locomotives up or down, makes no sense to me as they support cv 2 & 5. Their documentation that comes with the decoders needs a serious update. It needs to have a list of cv values for cv 29, nothing at all. Now the biggest bummer of all their customer service totally sucks, I have emailed them 3 or 4 times and not once have they responded.I would like to buy a few more of the decoders but if they don’t stand behind them what good are they, my question is simple but i don’t want to damage the decoder. It should not matter what the question is they should respond. I probably will still buy them but I would like a reply to my email.
William Martin Thrall (verified owner) –
Hello,I have just a few of these decoders but will probably buy a few more of them plus the speakers.I switched out the speaker that comes with the decoder to a mrc 16x35mm rectangular one. Alot better sound and louder as well. I strictly use soundtraxx tsunami2 decoders but gave these a try, and found that I like them.The documentation that comes with them could use a bit of an update,but it is helpful.Customer service could be abit better as well. I will buy more of them in the future.The sound files for the alcos could use an update but they are ok.I model the modern day so I need the soundtraxx decoders for all my modern locomotives which is a fleet of 130 locos.For a budget decoder these are really good. Thank you
William Martin Thrall (verified owner) –
Hello, I have the emd710 prime mover sound file, and it is a good decoder. Have not had any problems with it at all. It would be nice to have the decoder support cv6 mid range speed adjustment, but not a deal breaker. I changed the speaker to a 16x35mm rectangle one and it sounds better yet. I will pick up a couple more of these and some speakers for a few engines I don”t run alot. Overall a really good decoder.